Best Angled Finish Nailer – See Our 2018 Choice!

Best Angled Finish nailers are an excellent tool for carpenters and even for home owners to have around the house. They make finish carpentry work go much faster than manually nailing trim and molding pieces to walls.

Keep in mind that a nailer is not the only piece of equipment you’ll need to do finish work of this kind but more on that later.

Professional Carpenters: What to look for when choosing a best angled finish nailer

Realistically, a professional carpenter is going to have a range of pneumatic nailers at their disposal. There are different nailers for different jobs and all take a different width and length of nail. There are 15, 16, 18, and 23 gauge nailers available.
A carpentry professional is going to need all of those types of nailers to cover the broad spectrum of jobs that they may do. When it comes to the gauge or size of the nail, the lower the number, the larger the nail. The 15 and 16 gauge nailers are the most versatile and widely used of all the sizes. They can be used to hang thicker wall molding and base boards, door casings, and other thicker trim pieces.
Smaller gauge nailers are used for wood to wood connections and for finer trim pieces that would potentially be split by the larger gauge nails. They leave smaller holes and trim pieces are less likely to need filler after being nailed.
Professional carpenters are going to have a much broader range of applications that different gauge nailers are used for so more than one is almost essential. If a pro has to choose, a 15 gauge and a 23 gauge would be good bets.
Home Owners: What to look for when choosing a best angled finish nailer
Like we mentioned before, a professional carpenter is going to need a range of nailers because they have to be prepared for any potential jobs that come their way.
A home owner however is only going to need one type of nailer. So if you only have one shot to pick the right nailer for any home improvement job you might encounter, which one do you pick?
What Types of Work Will you Be Doing?
When choosing a nailer, first think about what types of jobs you’ll be doing with it. Although that could vary, most home owners are going to be using their nailers to hang trip or molding. These are common carpentry tasks because home owners often lay their own flooring or do their own painting. Both things that may require base boards and door trim to be removed.
Smaller Gauge Nailers
Most of the smaller gauge nailers (18 and 23) do not drive nails that are strong or long enough to hold base boards and other types of trim onto drywall.
These types of nailers are great for smaller projects or for wood-on-wood connections but those are not as common as just hanging base boards.
Larger Gauge Nailers
For home owners, the 15 and 16 gauge nailers are the best bet. The nails that they drive are larger but not so large that they will split some of the most common materials used for base boards. They are great, well-rounded tools that will allow you to complete most of the jobs you will encounter as a home owner that require a pneumatic nailer.
Accessories for Your Nailer
It’s important to point out that you will need more than just the pneumatic nailer and nails for your jobs. These tools run on compressed air that comes from an air compressor. You will also need a length of hose for an air compressor and all applicable attachments so that the hose can be affixed to the pneumatic nailer.
Types of Compressors
It doesn’t really matter whether you are a contractor or home owner, a smaller compressor usually does the trick for pneumatic nailers. The only scenario where you would want a larger one is if you were using a framing nailer.
For Best angled finish nailers, a small 5-6 gallon compressor with 150 to 200 max PSI (pounds per square inch air compression) will do the job just fine. These types of compressors are small, portable, easy to carry, and can run off of regular 220 volt electric outlets without blowing a circuit.
The hose you get should be at least 25 feet. Of course a professional will want something longer but for the home owner, 25 feet will be plenty. These hoses often do not come with adapters and other hardware that will enable you to connect it to your compressor and your nailer. Adapter kits can be found for 10 to 12 dollars.
Once you have a compressor, a hose, your adapter kit and a pneumatic nailer, you’ll be all set to tackle that next carpentry finishing job.

Leave a Reply

Your email address will not be published. Required fields are marked *